The SRS Smooth Return Series is engineered to reduce pad bounce
associated with increased return stroke speeds from the press. These innovative gas springs decelerate at the end of the stroke to bring the operation to a smooth, controlled stop.
Di-Dro Advanced Forming Systems
Hydraulic Manifold with Delayed Return Capability!
CS2 Series
The redesigned controllable gas spring
series features a normally open (NO) cartridge valve that simplifies the control system, combines the charge and bleed ports, and requires only 4 bar/58 psi air pressure. When you need to control return of the pad to achieve part quality and/or simplify part transfer, choose the CS2.
For more information, check out
the on-line brochure.
DRAC®
and DRAC® 2 Delayed Return Systems
Engineered
for metal stamping operations in which a delayed pressure pad
is required, DRAC and DRAC 2 systems provide consistent forming
pressure without valves to adjust and without the need for external
accumulators, tanks and hoses.
DRAC® Positive Lock
 This system is designed for lower applications
and incorporates prime, timing and delayed return nitrogen cylinders.
The DRAC positive lock provides full pad lockdown without springback
and full force on contact. It allows multiple actions from a
single action press and reduces the number of redraw operations.
For more information, check out
the on-line data sheet.
Check out the installation and maintenance manual.
DRAC® 2 Soft Lock
 Engineered for both upper and lower applications
where a full pad lockdown is not required, this system uses delay
cylinders that operate as normal nitrogen gas cylinders, providing
force on the pad in the die. The DRAC 2 soft lock features minimal
pad springback, does not require prime and timing cylinders,
and allows multiple actions from a single action press.
For more information, check out the on-line data sheet.
Check out the installation and maintenance manual.
 |
