Nitrogen Gas Springs
The originator of the nitrogen gas spring in 1964, Hyson Products today offers a comprehensive line of gas springs for a wide range of customer applications. Our engineers work continuously to develop or enhance our products to meet your needs for higher speeds, longer runs, increased reliability, and safe operation.

High Performance Bore Seal Gas Springs

Tanker®B Series
Over 25% more force than the Super Tanker Series it replaces!

• Dynamic lubrication extends spring life.
• Bore seal resists contamination and rod damage.
• Self-aligning piston rod accepts normal die movement and a degree of sideload.
• Nitrided rod resists corrosion.
• Tested to over one million cycles.
• For more information, check out the on-line catalog.
  

Tanker®S and Tanker®T

• The latest generation of the Tanker® Series.
• High force in short heights with contact forces to 15,400 lbs.
• Stroke lengths to 225 mm.
• Dynamic lubrication extends spring life.
• Bore seal resists contamination and rod damage.
• Self-aligning piston rod accepts normal die movement and a degree of sideload.
• Nitrided piston rod resists corrosion.
• Tested to over one million cycles.
• For more information, check out the on-line catalog.
  

Tanker® XP 400

• Engineered for high performance, long service life.
• Dynamic lubrication circulates oil onto seal surfaces with every stroke.
• Bore seal design for superior contamination resistance.
• Fully adjustable charge pressure.
• Available as self-contained or in a hosed system.
• Variety of mounting options for die design flexibility.
• For more information, check out the on-line catalog.
  

Tanker® XP 400HS

• Replaces 1 ˝ in. coil springs!
• 25 mm/1 inch diameter.
• Engineered for service life of 25 million cycles without recharge.
• High speed capable.
• Tested for service life at over 600 spm.
• Variety of mounting options for flexible die design.
• For more information, check out the on-line catalog.
  

Highest Force in Smallest Space Gas Springs

Heavy Duty Gas Springs

T4 Series

• Five models (T4-1000 to T4-9500).
• Contact forces from 9200 to 95000N.
• Full stroke forces from 14900 to 148000N.
• Extended stroke lengths to 300mm.
• Flexible guide absorbs lateral movement and misalignments in the die.
• Flexible piston ring for additional guidance.
• Patented safety features protect against over-load, over-pressure, over-stroke.
• Variety of mounting and linking options.
• For more information, check out the on-line catalog

T3 Series

• For the lowest cost per ton.
• Now with 12 models including the T3-20000 with full contact force to 75,000 lbs.
• Diameters from 3/4 in. to almost 8 in., and contact forces from 380 lbs. to almost 45,000 lbs.
• Patented safety guide and rod.
• Side port for easy hose connection.
• For more information, check out the on-line catalog

T3T Series

• Same force and diameters as the T3 Series.
• SAE-4 (7/16-20) port for use with standard full size hoses.
• Uses T2B flange mounts.
• Five sizes from 1000 to 9500.
• Up to 21,400 lbs. contact force.
• For more information, check out the on-line catalog

T2 Standard Gas Springs

T2 Mini Series

• Diameters from ˝ in. to 1-1/2 in., and contact forces from 95 lbs. to 2383 lbs.
• New T2-50 is only 12 mm in diameter!
• New generation of T2SS2 stripper springs includes 16 mm and 24 mm diameter models and enhanced features.
• For more information, check out the on-line catalog.

T2 SC Series

• Applications include heavy gauge blanking, piercing, stripping and shallow depth drawing.
• Bore seal sub-compact gas springs.
• Includes a 1 in. diameter spring with 955 lbs. of contact force.
• Stroke lengths to 50 mm/1.97 in.
• For more information, check out the on-line catalog.

T2 B Series

• Life in excess of 100,000 stroke meters.
• Cartridge design for easy maintenance.
• Secondary piston retaining ring for extra protection.
• Models from 750 to 7500.
• For more information, check out the on-line catalog.

T2 ISO Series

• Fully meets ISO 11901, NAAMS, Chrysler-Daimler, Ford and GM die standards.
• Modular and welded mounts available to meet automotive die standards as well.
• Secondary piston retaining ring for extra protection.
• Models from 500-10,000.
• For more information, check out the on-line catalog.

T2 L & LS Series

• Useful in low shut height applications.
• Short overall spring length.
• Contact forces from 595 lbs. to 6620 lbs., and stroke lengths from ˝ in. to 4 in.
• A variety of upper and lower mounting options is available.
• For more information, check out the on-line catalog.
  
  

T2SS2

• New T2SS2-16 is 15 mm shorter overall but 100% interchangeable with original.
• New T2SS2-16X15-GM meets GM 90.80.45 Global Die Standard.
• New T2SS2-24 is M24X1.5 model.
• For more information, check out the on-line catalog .
  
  
  

T2SL Series Stock Lifters

• For part lifting in transfer and progressive dies!
• Now with 170 and 300 models.
• Easily adjustable force.
• 170 models can be hosed together.
• Guidance and lift incorporated in one compact design.
• For more information, check out the on-line catalog.

Accessories
Hyson Products services and maintains the complete line of nitrogen gas springs. A full range of accessories including control panels, compression tanks, hose fittings, service gauge assemblies, nitrogen charging assemblies, seal kits and tool kits are available.